Ignitor/Ignition Module
For VW JFU6 igntiion distributor
Features
1. Times more spark energy than points
...Increased burn time
2. Multi-spark thru the entire RPM range
...Improved combustion
3. Increased spark energy
...More Horsepower & Better Mileage
4. REV limit set by user
...Accurate to +/- 50 RPM
5. Replaces points and condenser
...Easy installation
6. Must working with primary resistance more 1.3ohm ignition coil
Spark Plug Wire/Ignition Cable/Wire Sets
1) Materials:8 mm Pure Silicone wire sets.
2) All kinds of colours.
3) Delivery time: 21 days.
4) Guarantee: 3 years.
5) The diameter of cable have: Φ 5mm, Φ 7mm, Φ 8mm, ≥ Φ 9mm, .
6) Shore-hardness is: 700degree(+5degree or -5 degree), .
7) Working temperature range: -40 celsius degree~+250 celsius degree,
8) Tensile strength: ≥ 180N
| Rubber boots&caps used on spark plug and Distributor |
| Material |
Silicone |
| Shore-Hardness |
60°+ 5° |
| Elogation |
≥280ºC |
| Age resisance |
Hardness range is 0-7(Shore-hardness) after 200+2.5ºC.168H |
| Temperature range |
-40ºC~+200ºC |
| Tensile set |
≤20% |
| Tear strength |
≥15KN/M |
| Breakdown voltage |
≥30KV |
| Ozone resistance |
(50pphm 40ºCX72H) No dehiscence |
| Ignition Cable |
| Test item\Specification |
Ø5mm |
Ø 7mm |
Ø 8mm |
≥Ø 9mm |
| Implemented standard |
GB/T14820.3-93, ISO3808/2-1980 |
| Shore-Hardness |
75°+ 3° |
| Breakdown voltage(Industrial frequenly AC) |
Type A(Resistance) |
≥25KV |
≥35KV |
≥35KV |
≥40KV |
| Type B(Resistance) |
|
| Type C(Resistance) |
|
Resistance |
Type A ,B |
16KΩ+30% |
| Type C |
|
Wirewound 0.5 KΩ~16 KΩ(discrentionary) |
| Diameter of cable |
Ø5+0.3mm |
Ø 7+0.3mm |
Ø 8+0.3mm |
Ø 9+0.3mm |
| Working temperature range |
-40ºC~+200ºC |
| Tensile strength |
≥23KN |
| Ignition Cable Set |
| Appearance |
Colour and lustre is symmetry, character is clear and smooth, flat, no bug on the surface |
| Engage and disengage force |
Distributor: 30N~50N, Spark plug:50N~70N |
| Daming cable's resistance |
Suppression 16 KΩ/M+30%; Wirewound0.5 KΩ~16 KΩ(discrentionary) |
| Insulation |
No creepager under:30KV, 1H |
| Simulant ignition |
No creepager and no crack under: 50Hz 29KV 30s |
| Terminal pull-off |
≥100N |
| Temperature range |
-40ºC~+200ºC |
Our company are a leading manufacturer of ignition cable set and specialize in making pure Silicone ignition cable set for different cars, such as, GM, Ford, Peugeot, Citroen, Renault, Land Rover, Jaguar, Lada, Volga, FIAT, Daewoo, KIA, Hyundai, Mazda, Honda, Nissan, Toyota, Mitsubishi, Suzuki, Paykan, Opel, V W, Benz, BMW, Skoda, Volvo, etc.
We are OE manufacturer and reliable aftermarket supplier.
Our quality of ignition wire sets are made strictly according to ISO3808 standard, our company have passed through ISO9001: 2000 and Quality system by SGS now.
Ignition Cable, Ignition Cable Set, Auto Ignition Cable Kits, auto Ignition Cable, car Ignition Cable, auto parts Ignition Cable, Ignition Cable, Ignition Cable Set, Auto Ignition Cable Kits, auto Ignition Cable, car Ignition Cable, auto parts Ignition Cable, Ignition Cable, Ignition Cable Set, Auto Ignition Cable Kits, auto Ignition Cable, car Ignition Cable, auto parts Ignition Cable, Ignition Cable, Ignition Cable Set, Auto Ignition Cable Kits, auto Ignition Cable, car Ignition Cable, auto parts Ignition Cable, Ignition Cable Set, Auto Ignition Cable Kits, Ignition Cables, Ignition Cable Ignition Cable Set, Auto Ignition Cable Kits, Ignition Cables, Ignition Cable Ignition Cable, Ignition Cables, Ignition Cable auto, Ignition Cable car, Ignition Cable bus, auto Ignition Cable, car Ignition Cable, bus Ignition Cable, OEM quality auto parts ignition wire ignition cable ignition coil ignition distributor ignition distributor cap distributor disc distributor rotor ignition coil ignition cable ignition module brake cylinder brake master cylinder brake wheel cylinder brake pump clutch pump clutch master cylinder clutch slave cylinder clutch servo clutch operation cylinder auto parts offer from China HTAP Ignition Cable Set factory.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}